Norton ghost 2003.

After I make a ghost image the pc boots back into windows and I get SBIE9153 Cannot start driver (Sbie Drv) in event viewer with SB's taskbar icon a red colour but only for a little while then it seems to kick in and works ok.

Any subsequent restarts Sandboxie works fine.It just seems to stall for a bit after coming out of making a ghost image.

No big prob but may help in some other way.

Have set the sandbox service properties - recovery tab to restart the service after first and second failures and to run my search program after the third failure.

this happens some times if sandboxie control loads before the driver/service does...
when you wait until your pc has completely booted up, you can restart sb control and everything should work fine....

i don't think its a sandboxie problem.

SBIE9153 is pretty generic. It means: SbieSvc has tried to start the driver, but was unsuccessful.

Do you get any messages from the driver itself, saying why it won't start?

No error is generated.The Sandboxie icon starts as a red colour in the taskbar and seems to stall for a bit at the red colour then starts normally.

Must be the Sandboxie service taking a bit to kick in but only after ghost finishes and reboots into windows.

Will check it out a bit further when my next ghost image is due to be made.